EN
ES
Power Bank Reneh
External auxiliary battery made in a combination of bamboo and wheat straw. With 4,500 mAh charging capacity and an original cylindrical design. With Type C input/output connector + USB output. Presented in an individual box of eco design in kraft cardboard.Materials such as bamboo encourage the use of natural raw materials, reducing pollutant emissions. It comes from a highly resistant and versatile plant with rapid growth and regeneration, making of it an excellent alternative to traditional wood.Wheat straw promotes the use of natural raw materials, thus reducing pollutant emissions.The capacities shown in all our external auxiliary batteries are real, all of them incorporating non-recycled, grade A batteries, with a service life of at least 500 charging cycles, and complying with CE regulations. In addition, they are manufactured according RoHS standards, and in compliance with the following safety requirements: Power bank overcharge protection system. Complete discharge protection system, which increases the durability of the power bank. Blocking system to prevent short circuits. Constant charging transfer system, in accordance with the capacity of the target device.
Size: 0 x 0 x 11
Composition: Wheat Straw/ ABS/ Bamboo
Weight: 104 grams
Units per box: 50 units
Box measurements: 21.6 x 26.2 x 28.6 (cm)
Pad Printing
Pad printing is a printing process that involves intaglio printing our design onto a flat plate. The ink is applied evenly to the plate, and a silicone pad presses against the surface, creating a perfect imprint for printing on our product. One or more spot colors can be printed. It is primarily used for small items such as pens, USB flash drives, keychains, and lighters, and is the most economical solution for a variety of items.
Laser engraving
Laser engraving is one of the most precise and durable marking techniques available. A computer-guided laser beam is projected onto the surface of the product, creating a low-relief design. The result is sharp and elegant. The most suitable materials for this customization technique are metal, wood, or glass. This technique is commonly used on keychains, pens, and USB flash drives.
Related products
Recycled ABS and rPET power bank with a capacity of 10,000 mAh and a cycle life of at least 500 char
GP412066574
from
11,09€
Bamboo solar power bank with a capacity of 10,000 mAh, two USB-A outputs and two Type-C ports for in
GP412066572
from
15,49€
Rubberized ABS solar power bank with green indicator lights and a side flashlight. Two USB ports and
GP412062005
from
8,32€
Aluminium solar power bank with blue indicator lights. USB and USB-c port. Input DC5V/1A. Output 5V/
GP412062004
from
9,56€
